Advanced Fiber Optic Tester with Ethernet & Serial Interfaces - Specimen Track

Advanced Fiber Optic Tester with Ethernet & Serial Interfaces – Specimen Track

Meta Description: Explore the advanced fiber optic Ethernet tester with SV, Goose, IEEE-1588 message support, GPS sync, and precise time synchronization for network testing.

 

SKU: STRLEA-111 Category:

Features

  • 4/6/8 pairs of 100M fiber optic communication Ethernet interface can send or receive IEC61850-9-1/2 format SV, Goose,IEEE-1588 message
  • The whole machine supports a maximum 24 groups of SV message + 64 groups of Goose message output at the same time
  • 3/5 pairs 2~10M fiber optic ports can send and receive IEC60044-7/8 FT3, extended FT3, private FT3 format SV message
  • 12 channels small signal simulating output for testing small signal input protection devices
  • Built-in GPS synchronization module, one interface for receiving IRIG-B/PPS code synchronization or as providing IRIG-B code synchronization source
  • Complete SCL (SCD, CID, ICD, NPI) file parsing; auto-configuration of SV and GS message
  • Message detecting, monitoring, packet capture, and message auto-analysis function
  • PCAP message replaying, PCAP file editing function
  • Abnormal SV, GS, TF3 frame simulation test function
  • Network pressure and Goose storm test function
  • Intelligent terminal SOE response time test function, accuracy <0.1ms
  • Synchronization test function and synchronization mode support both IRIG-B and IEEE-1588
  • Built in IPC, can operate independently or connect with PC, same software with PC
  • With Fiber optic communication port for data transfer, mirroring, and loopback

 

Technical Specifications

Power Supply AC: 220V, Frequency: 50Hz
Measurement Accuracy <0.1 ms
Fiber-optic Ethernet Interface 4/6/8 pairs x 100 Mbits/s, ST, multimode, 1310 nm, IEC61850-9-1/2/LE, Goose, IEEE-1588
Send Dispersion <0.1 μs
Receiving Time Accuracy <25 ns
Maximum Output Flow >95 M
1588 Time-synchronization Accuracy <80 ns
Fiber-optic Serial Interface 3/5 pairs × (2 to 10 Mbits/s), ST, multimode, 850 nm, IEC60044-7/8, FT3, support Manchester code or asynchronous serial port
Time-synchronization Accuracy <25 ns
Synchronous Interface Built-in GPS, 1 pair × IRIG-B/PPS optical port, ST, multimode, 850 nm, Accuracy: <400 ns
Electrical Ethernet Interface 1 pcs, RJ-45, 100 Mbits/s
Small Signal Output 12×(0 V DC to 10 V DC), resolution: 1 mV, 4 mA to 20 mA output type can be customized, Amplitude Accuracy: 0.1 %, Phase Accuracy: 0.1°, Frequency Accuracy: 0.001 Hz
Binary Input 8 channels, 10 V DC to 250 V DC or idle contact, self-identifying, no polarity
Binary Output 8 channels, idle contact/fast output, AD/DC breaking capability: 0.5 A, 250 V, Fast Output Time: <10 μs
Current Source Output 3× (0 A to 30 A), 6x (0 A to 30 A)
Voltage Source Output 4× (0 V to 125 V), 6x (0 V to 125 V)
Binary Output 8 pairs
Binary Input 8 pairs
Auxiliary DC Output  1 channel
Dimension  14.96 in × 5.12 in × 11.81 in (38 cm × 13 cm × 30 cm)
Weight 12.13 lbs (5.5 kg)

Reviews

There are no reviews yet.

Be the first to review “Advanced Fiber Optic Tester with Ethernet & Serial Interfaces – Specimen Track”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top