Indoor IoT LoRaWAN Gateway for Seamless Connectivity – Specimen Track

Optimize IoT systems with an indoor LoRaWAN gateway, delivering seamless connectivity for smart networks and advanced data solutions.

SKU: STRMCL-155 Category:

Technical Specifications

Master Control Qualcomm 9531 master control chip, 128MB memory, 16M Flash
Power Supply DC12V
LoRa Frequency CN470-510 / EU863-870 / US902-928 / AS923 / AU915-928 / KR920-923 (Optional)
LoRa Communication Rate 292bps to 5.4kbps, support spread factor SF7-SF12
LoRa Tx Power 17 dBm
Maximum Power 20 dBm (at the antenna mouth)
LoRa Rx Sensitivity -141 dBm at SF12
LoRa Antenna Gain 2 dBi
LoRa Antenna Type Omni-direction
Channel 8 uplinks, 1 downlink
LoRa Working Mode Half-duplex
Base Station Network
LTE Model Various frequency bands
WiFi 2.4GHz, AP mode, Maximum power: 18 dBm
Debug Interface WiFi; LAN; serial port
Humidity 5 % to 95 %
Power Consumption 7W
Core Linux-4.14.88
LoRa Protocol LoRaWAN V1.1 GWMP protocol, Class A / C
Packet Forwarding Supports UDP (GWMP) / MQTT (GWMP) / built-in NS / WSS (based on Basic Station’s CUPS and LNS protocols)
Built-in NS Up to 100 terminal connections, supporting MQTT / HTTP push decryption and data parsing
Modbus TCP Up to 5 client access, supports function code 03, reads temperature, humidity, voltage, and other data
User Interface WEB interface
Language and Interface Chinese/English with logo or neutral interface
3G/4G Networking Supports Qualcomm universal dial-up QMI
IPv6 4G supports IPv6, LAN, and Wi-Fi provide IPv6 relay function
Local Time Synchronization Supports NTP client, different time zones can be set
WAN Port Protocols Static IP, DHCP client, and PPPoE.
Firmware Upgrade and Flashing Supports uploading firmware fresh in WEB and OTA remote upgrade
Wi-Fi Connectivity 2.4GHz, 802.11b / g / n, WPA2 PSK encryption, support STA+AP mode
Firewall IP tables v1.8.2, support customized rule, SYN-flood protection
Network Load Balancing Optional switching between WAN and 4G, prioritizing WAN traffic with 4G as a backup
Gateway ID Generation Gateway ID generated based on WiFi MAC address
Local Log Management Support logs stored in TF card, clears when full
Fault Self-Diagnosis Supports system self-diagnosis, self-healing, and report results
Remote Management Supports remote firmware upgrades, restarts, and maintenance
LoRaWAN Protocol Supports standard LoRaWAN protocols V1.0.X (V1.0.2, 1.0.3, 1.0.4), V1.1
Device Types Supports device types Class A and Class C
Uplinks and Downlinks 8 uplink channels, 1 downlink channel
Packet Forwarding Supports UDP packet forwarding protocol, Basics Station CUPS, and LNS protocol
Server Switching Can switch between embedded NS or external NS server as needed
Data Transmission Embedded NS MQTT protocol supports data transmission even when disconnected
Wi-Fi Connection Supports WiFi connection to the gateway for monitoring and configuration
Firewall Protection Supports firewall protection, SYN-flood defense, and DNS rebinding protection
Remote Management Supports remote OTA upgrade, self-diagnosis, and repair
Log Storage Support for TF card log storage
RJ45 Ports Two external RJ45 ports, one for WAN and one for LAN
IPv6 Support Supports IPv6, provides public network IP addresses for LAN and Wi-Fi
Intelligent Switching Supports automatic switching between WAN and 4G, prioritizing WAN
LTE Coverage Supports LTE with three module options for China, Europe, and the US, ensuring full network coverage in China
Temperature  14 °F to 122 °F (-10 °C to 50 °C)
Dimension 7.09 in x 4.53 in x 1.18 in (18 cm x 11.5 cm x 3 cm)

Reviews

There are no reviews yet.

Be the first to review “Indoor IoT LoRaWAN Gateway for Seamless Connectivity – Specimen Track”

Your email address will not be published. Required fields are marked *

Scroll to Top